SS WELD CLEAN PASTE
DESCRIPTION:
Thickened Pickling Paste / Gel.
APPLICATION: Pickling Paste for removal of Weld scale & heat discoloring from stainless steel surface.
METHOD: Apply with acid resistance brush, allow time to take effect, scrub & wash off with water. Working temperature 5°to 40°C.
USAGE: 100 mtr. Weld run / Kg.
PACK: 1 / 5 Kg.
INSTRUCTION FOR USE:
SS WELD CLEAN PASTE IS USED TO REMOVE THE BLACK OXIDE MARKS OF BURN SEAL LEFT DURING WELDING OF STAINLESS STEEL.
Degrease & clean weld joint by suitable solvent to remove dirt, dust, grease, oil ,crayon etc. (For best result use our S-2 Cleaner)
- Brush weld area with stainless steel brush.
- Apply SS Weld Clean Paste with bristle brush.
- Do not expose required area to sun light.
- After 10-45 minutes thoroughly rinse required surface with water, application time will depend on grade & thickness of Stainless steel.